5V 10A Li-Ion Cell Capacity Grading Charge Discharge Tester

Item No.: DT50W-16N
Input Power: AC200V~245V50/60HZ
Applicable Batteries: Li-ion / Polymer / NiMH / NiCd battery cells
Con-Voltage Range: 1V-5V
Current Output: 0.5A-10A
Operation Method: Online
Communication Port: LAN
Channel No.: 16 channels
Description
DT50W-16N can be applicable for capacity test, auto-cycle charge and discharge test, capacity grading and matching, balance maintenance, internal resistance test, etc. of various Lithium Batteries, Ni-MH Batteries, Ni-Cd Batteries. It can be compatible with 18650, 26650, 36650, pouch, and block cells. DT50W isolation detection technology can determine the location of the bad cells without disassembling the battery pack, then replace it. It can balance charge and discharge the unbalanced battery pack to balance the battery and restore the battery pack to normal balance.

It’s suitable for lithium battery testing, maintenance, regeneration, pack assembling, etc.

DT50W-128 is composed of the single DT50W-16, a number of DT50W-128 can constitute a testing group to match the needs of mass testing.

DT50W-16N

              


DT50W-128N




Applicable Batteries:  
Battery cells of Li-Ion, polymer, Ni-MH, Ni-Cd, etc.


Features:
• Each channel is equipped with a dedicated processor to ensure a perfect level of capacity calculation, timing, voltage and current control.
• All channel is under isolated test, it can directly test the cells of the battery pack.
• Independent heat source channel, temperature control and speed regulation fan.
• The LED light indicates the running status, testing status, matching status, alarm status.
• Fully compatibility with the batteries of Li-ion, Polymer, Ni-MH, NiCd, and so on.
• Fully compatible installation with 18650, 26650, 36650, pouch, block batteries.
• The height of the probe is adjustable, ruler scale for easy leveling 
• Online test between computer and device, the setting and result is particular and plentiful,
• With the work steps of Constant Current Discharge, Constant Power Discharge, Constant Resistance Discharge, Constant Current Charge, Constant Voltage Charge, Constant Current & Voltage Charge, Internal Resistance Test and Idle, etc.
• Work step automatically switching.
• The charge and discharge parameters can be customized.
• The matching can be processed, the test results can be matched according to the customized standard, and it can mark and display on the device. 
• 
Battery anti-reverse connection protection and alarm.
• The recording function of the test process
• With 3 Y-axis (voltage, current, capacity) and a time axis curve drawing ability, and data report function. 
• The color of the test status bar is customized, which makes it easy to check the test status of all devices when the number of tests is large.



Technical Specification:
 

Model No.: DT50W-16N

Input Voltage:

AC 220V± 10% 50Hz/60Hz

Input Power:

No-load 80W, full load 1650W

Voltage

 

 

Max. Charge Constant Voltage:

5V

Min. Discharge Cut-off Voltage:

1V

Tolerance:

0.02V

Current

 

 

 

Max. Charge Current:

10A

Max. Discharge Current:

10A

Min. Charge Cut-off Current

0.05A

Tolerance:

0.02A

Power

Max. Output Power ( Single Channel )

100W

Data Recording

 

 

Data Recording Conditions

 

 

Time interval

Voltage interval

Current interval

Charge

 

 

 

Charge Modes:

 

 

Constant current charge

Constant voltage charge

Constant current & voltage charge

Charge Cut-off Conditions:

Voltage, Current, Time, Capacity, -△V

Discharge

 

 

 

Discharge Modes:

 

 

Constant current discharge

Constant power discharge

Constant resistance discharge

Charge Cut-off Conditions:

Voltage, Current, Time, Capacity

Cycle

 

Cycle Index:

1-9999 times

Cycle Nest

Nestable

Protection

 

 

 

 

Power-down protection

Reverse connection

Over-temperature protection

Over-voltage protection

Short-circuit protection

IP Grade

IP20

Channel Control Mode

Independent control

High Voltage Insulation Between Channels

AC1000V/2min Normal

Voltage & Current Test Sampling

Five-core wires connection / Probe

Noise

< 76 dB

Host Computer Communication Method

based on TCP/IP protocol

Test Report Output Method

Excel

Server Disk Configuration

>100GB

Server Operation System

Windows XP, Windows 7/8/10

Communication Port

LAN

Equipment Work Ambient Conditions

Operation Ambient Temperature

0 ℃ - 40 ℃

Storage Temperature

-10 ℃ - 50 ℃

Operation Ambient Humidity

≤ 70 % RH (No condensation)

Storage Ambient Humidity

≤ 80 % RH (No condensation)

 

Illustrations:


Battery Connection Fixture

Pouch and Prismatic Cells(2 Choose 1):




► Cylindrical Cells:




Connection Schematic Diagram of Battery Pack Balance Maintenance


Packing  Information:
Produce Size: 65.5*28*16 cm(L*W*H)
Pcs/Ctn:            1 pc/ctn
Package Size:   76.5*42*27 cm(L*W*H)
G.W.:                 15.70 kgs
N.W.:                 13.70 kgs



Software Interfaces

Main Interfaces


List Display


Work Step Setting


Match Conditions Setting


Single Channel Data Analysis


Multiple Channel Data Analysis and Comparison


Test Data Exporting



Device Connection Diagram:




Let Us Bounce Into Your Inbox
Enter your email to hear from us about Product list, Latest Products and Customer application examples !